Easy to use car timer switch relay 1 to 10 / 150 / 480 / 1200 sec delay-off 20A direct 12V out

Dimensions:

📏 Length: 38 mm

📏 Width: 24 mm

📏 Height: 19 mm

Power Supply:

🔋 Voltage Range: 10 to 14 V DC

🔴 Red Wire: 12V+

⚫ Black Wire: 12V-

Output:

⚡ Direct 12V 20A

⚪ White Wire: 12V+

🔵 Blue Wire: 12V-

Key Features:

⏱️ Adjustable Timing: Easily set the delay time from 1 to 10 / 150 / 480 / 1200 seconds using a trimmer and a small screwdriver. Rotate clockwise to increase the time.

💡 LED Indication: The LED lights up when the relay is activated, providing clear visual feedback.

🔒 Safety Fuse: For added safety, you can install a 20A fuse on the red wire.

🔌 Direct Voltage Output: The output provides direct 12V, allowing you to wire the load directly.

Important Notes:

⚠️ The timer will not function if the power supply is below 10V.

❌ Setting the timer to the minimal time may cause the relay to click upon power-up (not recommended).

💪 If your load exceeds 20A, use a separate, more powerful relay after the timer.

Operating Principle:

1. Power On: The delay time starts when power is supplied. The LED lights up, and the output (white and blue wires) receives 12V.
2. Delay Period: The relay remains activated during the set time.
3. End of Cycle: Once the set time elapses, the relay deactivates, and the output stops receiving 12V, even if power is still on.
4. Cycle Restart: Restarting the power supply will repeat the cycle.

This timer is housed in a durable plastic box, ensuring longevity and protection.

Package Contents:

📦 Timer

📖 Instruction Manual and Wiring Diagram 1 to 10sec
📖 Instruction Manual and Wiring Diagram 1 to 150sec
📖 Instruction Manual and Wiring Diagram 1 to 480sec
📖 Instruction Manual and Wiring Diagram 1 to 1200sec

Upgrade your setup with our reliable and easy-to-use Adjustable Delay Timer today! 💪🔧