Item Description
2 pieces
12V 5 LED OUTPUTS 5 x 0.5w 0.1A
Each led will come on after previous and when all led come on -they will turn off and start from begining.
To see how it works go to: https://youtu.be/jLvyXsaq-cA
This circuit can be used to indicate left and right turn on a car, motorcycle, motor-bike. Two identical circuits will be needed, one for left and one for right.
Each led will come on after previous and when all led come on - they will turn off and start from beginning.
Power: + , - Have protection against reverse supply voltage. (Black and Red wires)
Direct 12V Outputs 0.10A - can carry powerful diode up to 0.5w each ( 5 x 0.5w)
Orange - common positive , 5x white - negative
If you use led 1.8V diodes must be soldered 330 ohms resistor, regarding wiring diagram
Power supply - 12V DC
With trimmer is adjusted the time when all diodes is on.
The module start with power on. For the led light can be used led strip, or separate diodes – for example 5 x 2 led.
The kit is assembled and ready for use.
Package contents:
1. turn signal module - 2 pcs
2. Instruction for use and wiring diagram.
