Item Description
Time relay with delay start from 1 to 10 seconds.
Power supply - 12V DC
Relay: 15А/125V DC
12A/28V DC
Time is adjusted by a trimmer.
With soldered wires for power and NO NC contact.
Timer need time 15-20 sec for discharging the capacitor, before restart power supply!
If it is restarted right now after cut off the power, it will not timing correctly!
Principle of work:
When power is on, the delay time starts. When set time ends, the relay is activated and output NO contact is closed, until cuts off the power.
By restarting power supply - cycle repeat. (recommended after 15-20 sec)
It can be used for example for delay on of car lights. When ignition is start - the timer will wait (1-10s) and then will turn on the front lights, to save the car battery. When ignition is off - the lights will cut off immediately. The timer needs to receive 12 from contact key and output to be wired to front lights switch.
Package contents:
1. SMD Time Relay
2. Instruction for use and wiring diagram.
