Item Description:
Timer with adjustable delay time from 1 to 150 sec.
Dimensions:
- length - 23 mm
- width - 16 mm
- height - 18 mm
Power supply - 10 to 14 V DC:
- red wire – 12V+
- black wire – 12V-
Output - direct 12V 20A
- white wire – 12V+
- blue wire – 12V-
Time is adjusted by trimmer, with small screwdriver - rotate counterclockwise – increase time
For safety can be placed fuse 20A at the red wire.
Please note:
- That timer will not work if power supply is below 10V
- If you set minimal time, relay will click when you power on the timer
- At the output have voltage, you can wire the load directly
- If you use load more than 20A, then must be used separate powerful relay after the timer.
Principle of work:
When power is on, the delay time start, and output (white and blue wire) will receive 12V . When set time end, the relay is deactivated and output stop receiving 12V, even that power is still on. By restart power supply - cycle repeat.
Package contents:
- Time Relay
- Instruction for use and wiring diagram.
