led car repair SRS airbag abs light timer switch 1 to 10 sec kit delay off 12V

Item Description

The kit is designed to repair always on airbag light. Suitable for LED airbag lights only up to 2.5W.

Timer with accuracy from 1 to 10 seconds.

Dimensions:

- length -  21 mm

- width - 17 mm

- height - 16 mm

LED indication for operation

Maximum allowable load control 12V/0.2A Suitable for LED Lights only up to 2.5W

Power:  red + , black -  Have protection against reverse supply voltage. 

Positive (red wire) must be connected to contact switch 12V+ , Negative (black wire) to ground.

Output: yellow wire  -  connected to airbag light positive, negative of the airbag light – to ground

Power supply - 12V DC

Time is adjusted by trimmer PR - 100K (rotate clockwise) increase the delay time.

Principle of work:

When power is on, the timer is activated (the output receive 12V) and keep that position, until end of set time.

By restarting power supply - cycle repeat.

The kit is assembled and ready for use.

      Package contents:

1. Time Relay
2. Instruction for use and wiring diagram.