Led car dome interior light delay switch module with dimming effect 1 to 30 sec

Limited Time Offer!

Hurry, our best price won’t last long! Click to check out the exclusive deal: Click here to see the best price

Product Overview:
This Dimming Control Module is designed to provide automatic dimming functionality for your car’s interior (dome) lights. The module ensures smooth and gradual dimming after a set delay (1-30 seconds) when the door is closed, followed by automatic switching off, enhancing both convenience and energy efficiency.

Wiring Diagram:

Connections Overview:

1. Black Wire: Connects to the ground terminal.
2. White Wire: Connects to the door switch terminal of the dome light (in parallel with the car door switch).
3. Red Wire: Connects to the positive terminal of the dome light.

Installation Instructions:

1. Locate the Dome Light:
   Locate the dome light and its corresponding wiring in your vehicle.

2. Cut the Door Switch Wire:
   Identify and cut the wire that connects to the door switch. This wire will be used for integration with the module.

3. Connect the Module:

   • Black Wire: Connect this to the ground terminal of your car's electrical system.
   • White Wire: Connect this to the door switch terminal of the dome light, ensuring parallel wiring with the door switch.
   • Red Wire: Connect this to the positive terminal of the dome light.

4. Double-Check Wiring:
   Ensure all connections are secure and that the wiring is insulated to avoid short circuits.

5. Test the Module:
   Once installed, test the functionality by opening and closing the door. The interior light should turn on when the door is opened and gradually dim and switch off after the programmed delay when the door is closed.

Key Features:

• Advanced Dimming Functionality: Automatically dims the interior (dome) light after a set delay (1-30 seconds) when the door is closed. Provides a smooth transition to darkness for enhanced comfort.

• Automatic Operation: When the door is opened, the interior light switches on. Upon closing the door, the light dims and then switches off after the programmed delay.

• LED Compatibility: Compatible with LED lights up to 1A (12W), ensuring energy-efficient and long-lasting illumination.

• Compatibility and Safety: Designed for cars with negative door switching signals. Ensure proper wiring as outlined in the diagram to guarantee proper operation and safety.

• Adjustable Dimming Time: Use the integrated trimmer to fine-tune the dimming delay to your preference (1-30 seconds).

• Compact Design: Module dimensions: 40mm x 28mm x 21mm, compact and easily integrates into your car’s electrical system without occupying excess space.

Package Contents:

• Dimming Module
• Instruction Manual and Wiring Diagram

Safety Note:
Ensure proper insulation of wires and correct polarity when making connections. Always disconnect the vehicle’s battery before beginning installation to prevent electrical accidents.

Deselectra electronics