Car airbag light timer switch time relay 1 to 10/25 sec kit Delay Off 12V 1A 12W with box

Limited Time Offer!

Hurry, our best price won’t last long! Click to check out the exclusive deal:

Click here to see the best price

Features:

• LED Indication: For operation status.
• Maximum Allowable Load Control: 12V/1A (extendable to 1.5A with a heat sink).
• Reverse Supply Voltage Protection: Ensures safe operation.

Power Connections:

• Red Wire (+): Connect to 12V+ contact switch.
• Black Wire (-): Connect to ground.

Output Connections:

• White Wire (+): Connect to the positive terminal of the airbag light.
• Blue Wire (-): Connect to the negative terminal of the airbag light.
• Note: The output must not be connected to a common ground. It must be wired to both terminals of the airbag light.

Power Supply:

• 12V DC

Time Adjustment:

• Adjust using Trimmer PR - 100K. Rotate clockwise to increase the delay time.

Operating Principle:

• When power is applied, the timer is activated (output receives 12V) and maintains this state until the set time elapses.
• Restarting the power supply will repeat the cycle.

Ensure all connections are secure and properly insulated. Follow the wiring instructions carefully to avoid damage or malfunction.