Item Description
Time relay with accuracy from 0 to 150 seconds.
Dimensions:
- length - 40 mm
- width - 27 mm
- height - 21 mm
Power supply - 10 to 14 V DC:
- red wire – 12V+
- black wire – 12V-
Output - direct 12V 20A
white wire – 12V+
Blue wire – 12V-
Output: 20A/12V DC
Time is adjusted by trimmer
Principe of work:
When power is on, the delay time starts, led diode lights. When set time end, the output (blue and white wire) will receive 12V, until cut off the power.
By restarting power supply - cycle repeat.
Device has plastic box, as you can see on the picture.
It can be used for example for delay on of car lights. When ignition is start - the timer will wait (1-150s) and then will on the front lights, to save the car battery. When ignition is off - the lights will cut off immediately. The timer need to receive 12V from contact key and output to be wired to front lights.
Package contents:
1. Mini Time Relay
2. Instruction for use and wiring diagram.
